Multimode Connectors

You are here: Home / All Products / Connectors / Fibre / Multimode Connectors

A range of multimode fibre connectors designed to support the fibre and ensure that when inserted within an adaptor the fibre is accurately aligned with its mating connector. With singlemode fibre the alignment of the two cables is critical to ensure low light loss between the mating fibres.   All connectors at Greenwoods Communications are designed specifically for either singlemode 9/125 or multimode 62.5/125 or 50/125 cables.   If the multimode connector you are looking for is not listed below please contact our sales team on +44 (0)845 226 2327 or sales@greenwoodscomms.com.

			Part number				Description		Supplied as
			54AB0116				Senko, LC/PC Multimode Simplex Connector, 127um, 2mm boot		1 Item
			54SN0001				Senko, E2000/PC Multimode Simplex Connector, 127um		1 Item
			54SN0052				Senko, FC/PC Multimode Simplex Connector, 127um, 3mm boot		1 Item
			54SN0053				Senko, FC/PC Multimode Simplex Connector, 127um, 2mm boot		1 Item
			54SN0064				Senko, LC/PC Multimode Simplex Connector, 127um, 3mm boot		1 Item
			54SN0065				Senko, LC/PC Multimode Simplex Connector, 127um, 2mm boot		1 Item
			54SN0066				Senko, LC/PC Multimode Duplex Connector, 127um, 3mm boot		1 Item
			54SN0067				Senko, LC/PC Multimode Duplex Connector, 127um, 2mm boot		1 Item
			54SN0070				Senko, MTRJ Singlemode or Multimode Connector, Female		1 Item
			54SN0071				Senko, MTRJ Singlemode or Multimode Connector, Male		1 Item
			54SN0072				Senko, MTRJ Multimode Ferrule, Thermoplastic, 127um		1 Item
			54SN0074				Senko, MTRJ Multimode Guide Pin		1 Item
			54SN0087				Senko, SC/PC Multimode Simplex Connector, 127um, 3mm boot		1 Item
			54SN0088				Senko, SC/PC Multimode Simplex Connector, 127um, 2mm boot		1 Item
			54SN0092				Senko, ST/PC Multimode Simplex Connector, 127um, 3mm boot		1 Item
			54SN0093				Senko, ST/PC Multimode Simplex Connector, 127um, 2mm boot		1 Item
			54ZZ2065				Senko, SC/PC Multimode Simplex Connector, 127um, 2mm boot		1 Item

For more information about our fibre-optic solutions please click on the link below and download our fibre-optic network solutions brochure: http://www.greenwoodscomms.com/pdfs/fibre-optics.pdf

Additional Information

E2000 - The E2000 connector series is one of the few fibre-optic connectors featuring a spring-loaded shutter, which fully protects the ferrule from dust & scratches. The shutter automatically closes when the connector is disengaged, locking out impurities, which could later lead to network failure and potentially harmful laser beams. The connectors are easy to install, with a push-pull latching mechanism, which click when fully inserted.

FC - The FC connector incorporates a physical contact (PC) pre-domed fibre end face that reduces back reflection over a flat end face ferrule. To reduce the unwanted back reflection further Greenwoods Communications offer the FC/APC connectors & adaptors

LC - The LC connector is a small form factor connector and is ideal for high density applications. The connector has a zirconia ceramic ferrule with a PC end-face and provides optimum insertion and return loss. The LC connector is used on small diameter mini-cordage (1.6mm, 1.8mm & 2.0mm) as well as 3.0mm cable.

MTRJ - The MTRJ connector uses a form factor latch like the standard RJ-45 connectors used in data components. The MTRJ is easy to terminate and install and its small size allows twice the port density on a plate than ST or SC connectors.

SC - The SC connector is well known for its locking mechanism that gives an audible click when punched into the adaptor. This push-pull design prevents rotational misalignment. To reduce the unwanted back reflection further Greenwoods Communications offer the SC/APC connectors and adaptors.

ST - The ST connector has bayonet style housing and a long spring-loaded ferrule to hold the fibre. These connectors are available in both multimode and singlemode